AMSOIL
Synthetic Gear Lubes
Modern vehicles are designed
with more horsepower and torque than in years past,
allowing them to haul and tow heavier and heavier
loads. This results in higher gear loading and hotter
running differentials. In addition, factors such as
increased interior space and lower floor boards push
axles higher into the vehicle's body, reducing air
flow and increasing heat. The closer proximity of
the axles to the exhaust system also effectively raises
heat, while more aerodynamic body styles and air dams
result in restricted air flow to the differentials.
A number of factors cause SUV, pickup
truck and van gears to operate under more severe conditions
than over-the-road trucks, contributing to increased
temperatures, higher gear loading and shorter drain
intervals. First, these vehicles have smaller gears
that must handle higher loads per square inch of surface
area. Second, their smaller sump sizes (and lower
volume of gear lube) cannot dissipate heat as well
as larger sump sizes. Third, air flow is significantly
reduced compared to over-the-road trucks. Fourth,
these vehicles are subject to more frequent stop and
go driving conditions and are more susceptible to
moisture from condensation due to varying temperature
fluctuations.
The AMSOIL Solution
In order to optimize its gear lubes
for modern applications, AMSOIL has updated its gear
lube formulations.
SEVERE
GEAR Synthetic Extreme Pressure Gear Lubes
(75W-90, 75W-110,75W-140, SAE 190 & SAE 250)
Specially formulated for severe duty applications,
AMSOIL SEVERE GEAR Synthetic Extreme Pressure
Gear Lubes are excellent for vehicles that experience
towing, hauling, steep hill driving, commercial use,
racing, off-road use, rapid acceleration, stop and
go driving and high ambient temperatures. AMSOIL SEVERE
GEAR Gear Lubes are formulated with increased
levels of premium quality additives, allowing improved
limited-slip and locking differential performance.
And with high viscosity indices,
SEVERE GEAR Gear Lubes provide an extra level
of protection at high temperatures. Extra additives
provide additional insurance against wear in case
of a lubricant film breach. These additives provide
an iron sulfide barrier coating that effectively prevents
micro-welding that leads to heat and friction. This
allows AMSOIL SEVERE GEAR Gear Lubes to prevent
thermal runaway, a phenomenon caused by a lubricant
's inability to control friction and increased heat
under high-stress conditions. By preventing thermal
runaway, AMSOIL SEVERE GEAR Gear Lubes inhibit
component damage and rapid lubricant degradation.
SEVERE GEAR Synthetic 75W--90
Gear Lube (SVG) replaces Series 2000 Synthetic 75W-90
Gear Lube (TGR).
SEVERE GEAR Synthetic 75W--140
Gear Lube (SVO) replaces Series 2000 Synthetic 75W-140
Gear Lube (TGO).
Long
Life Synthetic Gear Lubes (75W-90 & 80W-140)
AMSOIL Long Life Synthetic Gear Lubes are formulated
with new and enhanced additives designed specifically
for extended drain intervals of up to 500,000 miles
in over-the-road trucks. Long Life Synthetic Gear
Lubes are engineered to protect gears better than
conventional gear oils, resisting acid, carbon and
varnish formation and oxidative breakdown. Their superior
shear stability allow them to maintain their viscosity
during extended service. The enhanced 80W-140 formulation
replaces the former 85W-140 formulation, allowing
a greater operating range and improved cold temperature
performance. AMSOIL Long Life Synthetic Gear Lubes
are available in five gallon buckets, excellent for
use with lube dispensing pumps.
Long Life Synthetic 75W-90 Gear
Lube (FGR) replaces Synthetic 75W-90 Gear Lube (AGR).
Long Life Synthetic 80W-140 Gear Lube (FGO) replaces
Synthetic 85W-140 Gear Lube (AGO).
80W-90
Synthetic Gear Lube
The 80W-90 gear lube market is mineral oil based.
New reformulated AMSOIL 80W-90 Synthetic Gear Lube
is designed as a high quality synthetic replacement
for mineral gear oils. It is a multifunctional product
designed to surpass the requirements of equipment
and automotive applications calling for an SAE 80W-90
viscosity grade. Its naturally high viscosity index
and shear stable construction provide improved cold
temperature performance, while extreme pressure additives
provide excellent protection for gears and bearings.
AMSOIL 80W-90 Synthetic Gear Lube is competitively
priced, making it an excellent choice for cost conscious
customers.
|