Home Page
Motor Oil
Racing Motor Oil
Diesel Oil
Gear Lube
Grease
Transmission Fluid
Filters
Intake Systems
Industrial Fluids
2-Cycle Oils
Brake Fluids
Oil Analysis
Fuel Additives
Specialty Products
NGK Products
TRICO Wipers
 
Automotive
Trucking
Diesel Pickup
Motorcycle
Harley Davidsons
Motocross
Industrial
Heavy Equipment
Farming
Racing
R/V
Marine
ATV
Snowmobile
 
Oil Selection & Filter Lookup Guide

 
Synthetic Tractor Hydraulic/Transmission Oil
 
 
 

AMSOIL Synthetic Tractor Hydraulic/Transmission Oil

AMSOIL Synthetic Tractor Hydraulic / Transmission Fluid is formulated for farm and heavy equipment with a common sump for hydraulic fluid and vehicle transmission fluid. Engineered specifically to meet the tough applications of heavy-duty, hydraulic-powered operations, AMSOIL Hydraulic / Transmission Oil exceeds the performance requirements of virtually every piece of modern machinery.

ISO 46, SAE 30

PRODUCT DESCRIPTION

AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is the modern lubricant for modern farm and industrial equipment. Engineered specifically to meet the tough applications of heavy-duty, hydraulic-powered operations, AMSOIL Hydraulic/Transmission Oil exceeds the performance requirements of virtually every piece of modern machinery. With its unique blend of synthetic base stocks and advanced additive package, AMSOIL Hydraulic/Transmission Oil provides exceptional lubrication to reduce wear, resist heat, protect against rust and extend fluid and equipment service life.

Remains Stable at Temperature Extremes

AMSOIL Hydraulic/Transmission Oil operates over a wide range of temperatures. AMSOIL Hydraulic/Transmission Oil has a low volatility and high viscosity index to maintain its lubricity at high operating temperatures, and it flows at temperatures as low as -40F (-40C) for improved equipment operation and wear protection.

Provides Controlled Seal Swell

AMSOIL Hydraulic/Transmission Oil contains seal swell agents to maintain sealing integrity. It provides a slight seal swell to maintain a secure, tight fit.

Inhibits Rust and Corrosion

AMSOIL Hydraulic/Transmission Oil contains special rust and corrosion inhibitors to protect tractor components against rust and corrosion.

Inhibits Foaming

AMSOIL Hydraulic/Transmission Oil inhibits foaming. Foaming reduces hydraulic oil pressure and diminishes the lubricating protection provided by the oil. AMSOIL Hydraulic/Transmission Oil continues to resist foaming even when the reservoir level is low.

Suppresses Wet Brake Chatter

AMSOIL Hydraulic/Transmission Oil has friction modifier additives that effectively suppress wet brake chatter. When the friction modifier additives are depleted in a conventional hydraulic/transmission oil, an imbalance of pressure occurs in the tractor's brake system and vibrating in the tractor can become uncontrollable. AMSOIL Hydraulic/Transmission Oil remains serviceable for up to three times longer than do conventional oils, and its friction additives remain intact for smooth, continuous tractor operation.

APPLICATION

AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is Recommended for Applications Requiring the Following Specifications:

Tractors

  • Case International - MS-1207, HYTRAN
  • Caterpillar - TO-2, TO-3
  • Deutz-Allis - All
  • Ford - M2C41-B, M2C134-D, M2C86-B
  • Hesston/Fiat - All
  • John Deere - Quatrol, J20C, J20D, J14C
  • Kubota, UDT - All
  • Landini - All
  • Massey-Ferguson - M1127-B, M1129-A, M1135 and M1141 (also known as Permatran III)
  • Steiger - All
  • Versatile - All

Transmissions

  • Detroit Diesel Allison Division - C-4 Hydraulic Systems
  • ABEX/Denison - HF-0, HF-1, HF-1A, HF-2, HF-2A
  • Cincinnati Milacron - P-70
  • Sundstrand - HMS-103
  • Sperry New Holland - 767166, 287530
  • Sundstrand Hydraulics, HMS-103

Registered Trademarks

PERFORMANCE DATA

AMSOIL Synthetic Tractor Hydraulic/Transmission Oil exceeds the following rigorous performance requirements:

  • Caterpillar Friction Retention Test - Pass
  • Denison Pump Test (T5D Vane Pump, 46 Series Piston Pump) - Pass
  • Deutz-Allis Friction Retention Test - Pass, Deutz-Allis Turbo Hydra-Matic Oxidation Test - Pass, Deutz-Allis Power Steering Pump Test - Pass
  • Ford 7710 IPTO Stall Test - Pass, Ford 7710 Brake Capacity - Pass, Ford 7710 Brake Chatter Test - Pass
  • John Deere JDQ-42 PTO Clutch (2000) Cycles - Pass, John Deere JDQ-40 Brake Capacity Test - Pass, John Deere JDQ-40 Brake Torque Variation (Chatter) - Pass, John Deere JDQ-73 Cold Soak @ -35C - Pass, John Deere JDQ-74 Slow Cool @ -30C - Pass, John Deere JDQ-74 Slow Cool @ -35C - Pass
  • Massey Ferguson MF-285 PTO Clutch - Pass, Massey Ferguson MF-285 Wet Brake Chatter and Torque Characteristics - Pass
  • Plessy-Sundstrand Gear Pump Test - Pass
  • Sundstrand Model 22-2132 Variable Displacement, Piston Pump - Pass
  • Vickers 35VQ-25, Pump Test - Pass

INSTALLATION

AMSOIL Hydraulic/Transmission Oil is fully compatible with conventional hydraulic/transmission oils. To install AMSOIL Hydraulic/Transmission Oil in a hydraulic system, drain the existing hydraulic/transmission oil, change filters and install AMSOIL Hydraulic/Transmission Oil.


TYPICAL TECHNICAL PROPERTIES
AMSOIL Synthetic Tractor Hydraulic/Transmission Oil (ATH)
ISO Grade
46
SAE Viscosity
30
Kinematic Viscosity @ 100C, cSt (ASTM D-445)
9.3
Kinematic Viscosity @ 40C, cSt (ASTM D-445)
50.1
Viscosity Index (ASTM D-2270)
171
Flash Point C (F) (ASTM D 92)
230 (446)
Fire Point C (F) (ASTM D 92)
242 (468)
Pour Point C (F) (ASTM D 97)
-40 (-40)
Four Ball Wear Test (ASTM D 4172B) Scar, mm
0.35
 
 

© Copyright 2008 by Synthetic Solutions. This site may not be duplicated, reproduced or used in any way
without the expressed authorized permission of Synthetic Solutions. Synthetic Solutions is an authorized dealer of
AMSOIL products. All materials used on this site are the sole property of Synthetic Solutions. Site designed by
JB Design