AMSOIL DOMINATOR Synthetic 2-Cycle Racing Oil
New AMSOIL DOMINATOR Synthetic 2-Cycle
Racing Oil is a robust formulation specially engineered
for unsurpassed protection in high performance two-cycle
motors, both on and off the track. It contains heavier
synthetic base oils that provide more lubricity for
"on the edge" operation. DOMINATOR reduces friction
and protects pistons and bearings subjected to the
rigors of racing. DOMINATOR contains the right additives
for clean motor operation.
DOMINATOR, an AMSOIL exclusive formulation,
lubricates and protects high performance two-cycle
motors, both on and off the track. High performance
motors, particularly those that are modified, operate
hotter and at higher RPMs than recreational motors,
and they need good oil for peak performance. DOMINATOR
is engineered for racing. It has the right film strength
and clean burning properties for "on the edge" operation.
- Provides excellent film strength
for high heat, high RPM motors
- Reduces friction for maximum power
- Recommended for use with coated
or non-coated racing pistons
- Recommended for use with exhaust
- Recommended for use with high
octane racing gas
- Burns clean; Prevents ring sticking
and plug fouling
- Provides excellent protection
at 50:1 pre-mix or in injection system
Super Film Strength
High performance two-cycle motors
have high compression ratios, which significantly
increase combustion chamber heat and crankshaft bearing
pressures. Hot combustion processes quickly burn off
and evaporate light oils and cause rapid piston expansion,
decreasing piston-to-cylinder wall clearances. This
promotes piston scuffing and possible seizure. And
increased pressure on crankshaft bearings promotes
metal-to-metal contact, wear and pitting.
High heat and pressures require tough
oil with better film strength and more lubricity.
DOMINATOR, constructed with AMSOIL heavy synthetic
oil, handles high heat better than mineral oils and
provides improved film strength and lubricity. DOMINATOR
reduces friction and provides an extra measure of
protection against piston scuffing and crankshaft
High combustion processes require
the proper additives and oils to control deposits.
DOMINATOR contains strong, high temperature detergent
additives and highly pure AMSOIL synthetic oil. It
prevents deposits that cause ring sticking, plug fouling
and exhaust port blocking. DOMINATOR is an optimized
product for severe service.
DOMINATOR is recommended for use
in high performance stock or modified two-cycle motors,
including air or liquid cooled snowmobiles, personal
watercraft, motorcycles (Moto X), ATVs, go-carts and
outboard motors*. Good
for use with coated or non-coated pistons, high-octane
racing fuels and exhaust power valves. Compatible
with most other two-cycle oils, however, mixing oils
should be minimized.
Use at 50:1 pre-mix ratios (2.6 oz.
oil per U.S. gallon of gas) or as injection oil where
JASO FC or API TC oils are specified. Not suitable
for use with alcohol or nitro-methane fuels.
Not suitable for long-term use in outboard motors
as a TC-W3 type oil, although excellent as a race
oil for short-term use where motors are periodically
Synthetic 2-Cycle Racing Oil
Kinematic Viscosity @ 100°C, cSt
Kinematic Viscosity @ 40°C, cSt
|Viscosity Index (ASTM D-2270)
Pour Point °C (°F) (ASTM D 97)
Flash Point °C (°F) (ASTM D 92)
|Fire Point °C (°F) (ASTM D
harmful or fatal if swallowed. Contains synthetic
lubricant and petroleum distillates. If swallowed
do not induce vomiting. Contact a physician
immediately. Keep away from fire, heat and open
flame. Use with adequate ventilation. Avoid
frequent or prolonged skin contact. Flush eyes
with water for 15 minutes in case of contact.
KEEP OUT OF REACH OF CHILDREN.