Home Page
Motor Oil
Racing Motor Oil
Diesel Oil
Gear Lube
Grease
Transmission Fluid
Filters
Intake Systems
Industrial Fluids
2-Cycle Oils
Brake Fluids
Oil Analysis
Fuel Additives
Specialty Products
NGK Products
TRICO Wipers
 
Automotive
Trucking
Diesel Pickup
Motorcycle
Harley Davidsons
Motocross
Industrial
Heavy Equipment
Farming
Racing
R/V
Marine
ATV
Snowmobile
 
Oil Selection & Filter Lookup Guide

 
Saber Outboard, 100:1 Pre-Mix
 
 
 

AMSOIL Saber Outboard Synthetic 100:1 Pre-Mix 2-Cycle Oil

New AMSOIL Saber Outboard Synthetic 2-Cycle Oil is specifically designed for lean mix ratios in pre-mix applications. Saber Outboard contains lower temperature dispersants for water-cooled outboard motors. Extensive testing shows superior lubricity and cleanliness properties at lean mix ratios with this premium synthetic formulation.

Product Performance

  • Saber Outboard is a very low smoke, low odor product
  • At 100:1, produces 30 percent lower emissions than oils mixed at 50:1
  • One mix ratio for everything eliminates confusion
  • Versatile and very good for many applications
  • Cost effective compared to oils mixed at 50:1 or richer
  • Saber Outboard exhibits low aquatic toxicity
  • Lean mix ratio prevents plug fouling and exhaust port deposits

PRODUCT DESCRIPTION

AMSOIL Saber Outboard Synthetic 100:1 Pre-Mix 2-Cycle Oil is formulated with exclusive AMSOIL synthetic base oils and premium additives. Designed for lean mix ratios in two-cycle motors, Saber 2-Cycle Oil has excellent lubricity and cleanliness properties, controlling friction and preventing wear, plug fouling, ring sticking and exhaust port blocking. AMSOIL Synthetic 100:1 2-Cycle Oils have been protecting and providing improved performance in two-cycle motors since 1973.

Saber Outboard

Saber Outboard (ATO) is specifically designed for outboard motors. It is also very good for personal watercraft, jet boats, motorcycles, snowmobiles and ATVs. Saber Outboard contains a heavy dose of lower temperature dispersant additives that excel at preventing varnish and deposits from forming in water-cooled motors. Saber Outboard is a very low smoke, low odor, low toxicity product that produces as much as 30 percent fewer emissions at 100:1 mix ratios than oils mixed at 50:1. It is ideal for trolling motors as it prevents "oil loading" and plug fouling for rapid throttle response. Operators and the environment benefit from the use of Saber Outboard. It is recommended for pre-mix use where TC-W3 or API TC is specified.

Applications

AMSOIL Saber 100:1 2-Cycle Oil is recommended for 100:1 mix ratios in normal service and 50:1 to 80:1 mix ratios in severe service applications such as commercial equipment operations and racing.


TYPICAL TECHNICAL PROPERTIES
Saber Outboard Synthetic 100:1 Pre-Mix 2-Cycle Oil

Kinematic Viscosity @ 100°C, cSt (ASTM D-445)

13.4

Kinematic Viscosity @ 40°C, cSt (ASTM D-445)

91.3
Viscosity Index (ASTM D-2270)
148

Pour Point °C (°F) (ASTM D 97)

-36 (-33)

Flash Point °C (°F) (ASTM D 92)

102 (216)
Fire Point °C (°F) (ASTM D 92)
106 (223)
DANGER: harmful or fatal if swallowed. Contains synthetic lubricant and petroleum distillates. If swallowed do not induce vomiting. Contact a physician immediately. Keep away from fire, heat and open flame. Use with adequate ventilation. Avoid frequent or prolonged skin contact. Flush eyes with water for 15 minutes in case of contact. KEEP OUT OF REACH OF CHILDREN.
 
 

© Copyright 2008 by Synthetic Solutions. This site may not be duplicated, reproduced or used in any way
without the expressed authorized permission of Synthetic Solutions. Synthetic Solutions is an authorized dealer of
AMSOIL products. All materials used on this site are the sole property of Synthetic Solutions. Site designed by
JB Design